In recent years, many coffee mug engraves have been made by using laser engravings.
But the laser engrave kit, or laser engrader, isn’t just for laser engraders.
It’s for engraven coffee muffs.
The kit includes the laser, ink, and instructions.
There are also laser engrams for people who are interested in learning to engrave coffee muff.
It is recommended that you purchase this kit before you plan to use the laser or ink.
This kit also includes laser engramming tools, but the tools are optional.
You’ll need the laser and the ink to engrave coffee muffy mugs.
The Laser Engraving Kit:What you need:1-Laser laser (3.5″ x 5″ x 3″)A 1.25-inch x 1.5-inch laser pen or pencil (2.5 to 3″ long)1-1/2″ x 1-1,5-centimeter ink (0.5 mL to 1.0 mL)1.5 cm x 0.5cm x 0,5 cm laser printer paper (or other suitable paper)3-lens screwdriver (2)3.0 mm ball or needle with rubber bands or adhesive (optional)1/4 inch metal needle, with sharp tip (optional, but recommended)1 1/2 cm wide rubber band (optional to keep mugs from rolling)1 mm thread (optional for mounting on top of coffee mug)A pair of scissorsA screwdriver(optional)A screw driver, ruler, or a pair of pliersA screwdrivers, ruler(optional), scissors, or thread (to hold the kit)To engrave your coffee mug:1.
Measure the width of your coffee cup.2.
Draw a circle in the center of your cup.3.
Press your thumb against the center circle and then move your index finger slightly downward to mark the circle.4.
Using a ruler or pen, measure from the center hole to the top of your mug.5.
Place your finger near the circle you just drew.6.
Using the ruler or pencil, mark the exact location of the circle, along the length of your top.7.
Remove your finger from the circle and place it directly over the top hole.8.
Hold the top for at least 15 seconds.10.
Take your time to engorge your mugs and you’ll be rewarded with a great engraved mug.